Extra level of alarm
How does it work?
Suppose a caregiver carries the child around in a car and does not have a smartphone to be connected to the Doko Doko Pad.
In this case Mamori becomes fundamental, because it is paired with the cushion and it can monitor the child on board in place of the smartphone.
In case Mamori detects that the car has stopped for more than 15 minutes and the child is still onboard, the system will alert one of the parents on his/her smartphone.
If the alerted parent does not turn off the alarm, as a second step, the system will start calling the emergency contacts pre-selected by the parents in the App and, as a further step, will send messages containing the GPS position of the car.
Start using Doko Doko Pad with Mamori
following these three simple steps
Activate a Mamori
on Trackimo+ app
Download the Trackimo+ app and follow the guided instructions to connect Mamori to your phone.
Activate the Doko Doko
Pad on Tata app
Download the Tata app and follow the guided instructions to connect Doko Doko Pad to your phone.
Connect the two
Through the Tata app you can associate a Mamori to the Doko Doko Pad.
Find below the instructions to get started.
Follow this simple steps to associate
Mamori to Doko Doko Pad
Get started in Trackimo+ app
1. Activate Mamori and copy the IMEI code
Before proceeding, make sure you have successfully activated a Mamori on the Trackimo + app.
Tap the device icon in the main screen.
Then, tap on “settings” and you will end up on a screen where you can find the IMEI code. Tap on the icon next to it to automatically copy it. Continue below.
Continue on Tata app
2. Paste the IMEI code in Tata app
Before proceeding, make sure you have properly activated a Doko Doko Pad.
Then, from the pad details menu, tap “add to Trackimo device”. Now you have to enter the IMEI code of the Mamori that you find on the Trackimo + app and tap “Continue”.
Continue on the email
3. Confirm the device association email
Before proceeding, you must confirm the device association email sent by Trackimo.
Then, go back to Tata app and Tap “Ok, done it”.
Continue on Tata app
4. Reboot Mamori
to finish the association
After confirming the email, go back to Tata app and tap “Ok, done it”! and continue.
Then, before proceeding, make sure you have restarted your device. After the reboot you can
tap on “continue”.
Find out how to reboot MamoriPress the Mamori button twice and hold till you see the red light. Wait for the device to shut off. Long press again the button till the green light to turn mamori on.
Congratulations, the pairing of the two devices is done.
Just the last tip
When the two devices are paired, Mamori takes a while to connect the first time.
This may take up to 3 min.
Please, wait for the status to change from “Waiting for connection” to “Connected”.
More safety. Less to worry about.
“After using it for a month I would say excellent app, respects all the specifications. Today I ordered the second device. “